- M CE verifiable (application for legal trade)
- versatile transmitter 96x96x80 mm (lxhxpx); perforation 90x88 mm (lxh) for panel mounting
- 4 dependent and 4 independent channels for direct reading and diagnosis of any connected load cell
- red LED display with 6 13-mm digits and 6 LEDs for showing active functions
- up to displayable 800.000d with internal resolution up to 3.000.000 points
- A/D 24-bit sigma-delta conversion
- connectable with up to 16 analog load cells with 350 Ω input resistance
- master/slave management (up to 4 slaves / 1 master).
- extensive functions like automatic- and presettable tare, total weight, recipe,
- net/gross, piece counting, hold, peak etc.
- RS-232/C bidirectional port for connection to external units
- RS-485 bidirectional port for network connection
- 2 photomosfet outputs; 2 opto-isolated photo coupler inputs
- 16-bit analog output 4-20 mA / 0-5Vdc / 0-10Vdc (model AST-P-AN)
- power: from 12 Vdc to 24 Vdc
- CE verified
- options: real time clock, alibi memory with date/time, max. 120.000 weighings; printer for panel mounting; wireless connection from indicator to PC/printer/USB/comport; ethernet interface
- Zero setting; automatic and presettable tare; print and/or data transmission; ON/Stand-by; weighs totalization; formulation; net/gross weight switch; piece counting; hold; peak; kg/Lb conversion
- reading of the net, gross, and tare weights, microvolts or ADC converter for all channels; clearing; automatic and presettable tare; scale switch; printing; message display; setting of average piece weight in piece counting; setting of set points of the outputs; simulation of key pressure; reading/writing of alibi memory
- reading of the net, gross, or tare weights; clearing; automatic tare; scale switch; setting of set points of the outputs; reading/writing of alibi memory
- RS232/C bidirectional port configurable for connection with external units; RS485 bidirectional port configurable for network connection;
six 150 mA 48 Vac / 150 mA 60 Vdc (NO) photomosfet outputs which may be configured as direct control or upon weight stability, with programmable weight thresholds (disable and enable thresholds); 2 configurable optoisolator photocoupler inputs: 12÷24 Vdc, 5 mA min - 20 mA max.; MODBUS serial protocol; with PROFIBUS serial interface; with 16-bit analog output 4-20mA / 0-5Vdc / 0-10Vdc at choice; the maximum applicable voltage is 350 Ω and the minimum applicable voltage resistance is 10 kohm (only type AST-P-AN)
Finishing of the dosage when reaching the target weight is managed as follows:
- single product dosage (load),
(manually and automatically controlled).
Configuration for managing of one dosage system of one product. Application with partition of products with equal weight, filling of hopper or extracting of accurate quantities from a silo, supporting the operator with manual dosage.
- single product dosage (unload).
Configuration for managing of one dosage system of one product. Application with partition of products with equal weight or extracting of accurate quantities from a silo, with management control for refilling the silo.
- multi product dosage (load and unload)
Configuration for managing of one dosage system of several products. For mixing of products through recipe, with management control for mixers, burners or vibrators, using switching contacts destinated for this purpose.
LOAD: by weighing of the container to be filled; the weight increases until the set target weight is reached
UNLOAD: by weighing of the silo from which thet product is to be extracted; the weight decreases until the set target weight is reached